P-201 transfer pump · intermediate · Maintenance technician, 1–3 years
P-201 header pressure reads low but the process seems fine
HMI says the header is at 41 psi and the pump has ramped to full speed, but downstream is not complaining and nothing has changed on the line.
Mode
Hints available, and they cost evidence marks.
HEADER PRESSURE LOW — P-201
On arrival
- Pump running, drive at 100%.
- HMI header pressure sitting at 41 psi.
- Downstream users report normal supply.
Established readings
Nothing established yet. Every reading below appears once you have taken the action that produces it.
00:00 · complaint
HMI says the header is at 41 psi and the pump has ramped to full speed, but downstream is not complaining and nothing has changed on the line.
Diagnostic actions
energized
Inspect
Measure
Repair